Nov 15, 2006 · The Mark 1 bottle crusher breaks and empties unwanted glass bottles from 165mm down to 100ml sizes. Available wall, bench, drum or trolley mounted, liquids and glass are discharged through the open base into a suitable container or disposal system. The Mark 2 is for ampoules, vials and small glass bottles from 1ml A/S vials to 100ml sizes.
The paddle is a double-sided slide attached to the vial cap. Each side of the slide is used to perform a separate test. The slide has a molded-in grid for easy colony counting without opening the optically clear, leakproof vial. Paddle Tester, Total Aerobic Bacteria/Yeast and. Related Products: Paddle Tester.
Remained contents of each vial were also tested for aerobic bacteria. Microbial contamination was confirmed by microbiologic methods. Results: Bacterial contamination was identified in 36 of 637 (5.6%) of vials, with no difference in contamination among different wards in the hospital or the medication type. Most commonly identified organisms
Container Closure Integrity (CCI) tests are performed on rigid containers such as vials, screw cap bottles, syringes, and auto injector type devices to check for leaks. Dye immersion uses a tracer dye with a vacuum to draw the dye through any defects. Bacterial immersion uses a bacterial solution, pressure, and a vacuum.
If swab must be used, collect one aerobic and one anaerobic transport swab. Use a transport device(s) appropriate for aerobic and anaerobic culture, such as ESwab (white or blue cap); BD™ Port-A-Cul vial or Anaerobe Systems Tissue Transport device or swab in Amies gel medium along with a swab in Amies liquid medium.
It has a pH of 7.3 ± 0.2 and the storage temperature is 2-25°C. The incubation temperature varies between 20-25°C, with an incubation time of 7-14 days. One box of product contains 12 bottles of 100ml of Medium. Each bottle has a screw cap with a septum, which minimizes the risks of cross-contamination and optimizes the disinfection procedures.
1. Collect stool specimen. 2. Do not contaminate with urine or water. 3. Using spoon attached to cap of container select portions of specimen containing pus, blood, or mucous. 4. Add a sufficient amount of specimen to transport media to bring liquid level up to “fill to here” line. Do not fill above line indicated on containers. 5.
Jan 14, 2020 · 1. Tape five vials together in a row. For testing aerobic bacteria, use the Phenol Red vials (#180-36). For testing anaerobic bacteria, use the Modified Postgate B vials (#180-38). 2. Number the vials 1 through 5 and label them with the sampling point, date, and location. 3. Remove the metal tab from the top of each vial without removing the
Dec 15, 2018 · Routine blood culture can easily recover aerobic and anaerobic bacterial organisms as well as Candida spp., Aspergillus spp. and sometimes Fusarium spp. which are the most common fungal organisms to cause bloodstream infections.
Transport bottles at room temperature after collection. Adults (2-bottle set): Collect blood using blood collection set and adapter cap, following instructions on procedural chart included in kit. Inoculate 8-10 mL into the BacT/Alert® aerobic bottle, and then inoculate 8-10 mL into the BacT/Alert® anaerobic bottle.
Jun 15, 2008 · The efficiency of EPS extraction from phenol-fed, aerobic granules was studied using formaldehyde + NaOH as a chemical reagent. Ultrasonication was applied to enhance EPS extraction before or after extraction. A total of eight extraction methods were tested, all effectively extract EPS from sludge flocs of loose interior.
The paddle is a double-sided slide attached to the vial cap. Each side of the slide is used to perform a separate test. The slide has a molded-in grid for easy colony counting without opening the optically clear, leakproof vial. Paddle Tester, Total Aerobic Bacteria/Yeast and Mold (Tryptone Glucose Extract Agar/Sabouraud Dextrose Agar), 10/pk.
Aijiren's autosampler vials include a wide range of HPLC vials and GC vials designed and optimized to work with Aijiren autosamplers & HPLC, GC platforms. These HPLC and GC vials are available as snap, screw or crimp in style, 15uL to 20 mL in sample size, and various of low bleed and high-quality material composition.
Feb 15, 2010 · In total, 8 ml of strain I5 was incubated at 35 °C in 500 ml reagent bottles containing 100 ml sterilized MP medium with 400 mg L −1 phenol, and 100 ml of one of the four collected supernatants (I8-E, I8-S, I5 + I8-12 h, and I5 + I8-24 h). Each set of bottles fed with a specific supernatant was further divided into three groups.
.jpg)
.jpg)
.jpg)
